spectrum+ junior Specifications
65 x 65 x 2.5mm galvanised RHS with powder coat finish.
2.0mm galvanised steel sheet, punched dimple pattern and slip resistant powder coat.
Powder coated galvanised sheet steel, corrugated steel sheeting or rotomoulded plastic as specified.
750mm high guardrail panels on platforms over 500mm.
Powder coated galvanised steel tube or HDPE plastic panels as specified.
27mm O/D galvanised steel tube with powder coat finish.
Supplied at climbing access points as appropriate.
34mm O/D galvanised steel tube with powder coat finish.
Fabricated from galvanised steel, welds treated with zinc rich primer – powder coat finish.
Heavy duty reinforced fibreglass, rotomoulded plastic or stainless steel as specified.
Powder coated galvanised steel tube with end panels.
Rotomoulded plastic beads or HDPE plastic sheet panels as appropriate.
Synthetic strands braided over a galvanised steel wire core.
Trilobial taptite bolts, cup head bolts, recessed safety nuts, screws – vandal resistant with galvanised/class 3 finish.
Concrete to a minimum depth of 500mm with earth hard packed to mouth of hole.
- Powder coated post cap
- Internally galvanised upright
- External galvanising
- Metal pre-treatment
- Galvanised bolt
- Safety nut with class 3 finish
- Polyester powder coat
- All welds treated with zinc rich primer
- Powder coated steel components
- Taptite bolt with class 3 finish and vandal resistant drive